Building Vacuum Insulation Board

Building vacuum insulation panels (referred to as VIP panels) use core materials and getters as filling materials, and use composite gas barrier films as wrapping materials. Its products effectively avoid air convection, radiation, and heat conduction, and the thermal conductivity is greatly reduced, and the lower value can reach below 0.002w/m.k; it does not contain any ODS (Ozone Depleting Substances) materials. The exterior wall based on vacuum insulation panels for construction is safer and more abundant in the selection and treatment of finishes.

Building vacuum insulation panels have the following advantages:
1. Good thermal insulation effect and low thermal conductivity can reach below 0.002W/m.k.
2. High safety The main materials are inorganic thermal insulation materials, ultra-thin and lightweight, not easy to fall off, fireproof and non-combustible.
3. All non-toxic/green/environmentally friendly materials are natural inorganic substances, which can be safely used in production and life.
4. High space utilization rate The thickness of the product is only 20%-25% of the traditional material, which improves the building rate.
5. Long service life It is composed of inorganic materials with stable performance and strong weather resistance to temperature, climate and environmental changes. Vacuum insulation panels have been used in the industrial field for more than 40 years and have been used in the construction field for more than 30 years. According to the use monitoring of the University of Cologne in Germany, its service life can reach more than 75 years.
6. The unit weight is light, and it is not easy to fall off after being installed on the wall, which improves the thermal insulation effect of the building and the safety of the facade.