With the improvement of people’s living standards, ceiling decoration is gradually increasing. When decorating, we should not only pay attention to the decoration of the ceiling, but also pay attention to its practicality. People’s demand for quiet life and the increase of modern noise form a strong contrast, so sound-absorbing ceilings have entered thousands of households and become an indispensable part of modern decoration. The mineral wool sound-absorbing ceiling has become the leader among many ceilings because of its high sound absorption coefficient, thermal insulation, good flame retardancy, excellent flatness, and beautiful decorative effect. So what should be paid attention to in the installation of mineral wool sound-absorbing ceiling?
First of all, we need to do the preparatory work before construction, check the installation conditions of the sound-absorbing panel ceiling space, check whether the various ventilation pipes and pipelines in the ceiling room that need to be hidden have been installed and debugged; check the pre-buried hanging bars or wooden bricks on the wall. Whether the quality and quantity meet the requirements; to build the scaffolding required for the installation of the suspended ceiling and prepare the sound-absorbing ceiling for the installation of the suspended ceiling, as well as the required wooden joists or steel joists, etc.
After starting the construction, first mark the positioning according to the design drawings, mainly the elevation line and the keel layout line. Bounce the keel and the lifting point to the bottom of the floor. Generally, the distance between the keel and the boom is controlled within 1.0-1.2m. The elastic line should be clear and the position should be accurate. Secondly, the suspension system is fixed. The general movable assembled ceiling is not considered by the master, so the suspension system is relatively simple. At present, most of them are fixed on the structure with shooting nails or expansion bolts, and the other end is the same as the main structure. The circular hole of the keel is fastened. Then there is the installation of the keel, and attention should be paid to the leveling during installation. The last is the installation of the sound-absorbing ceiling. After the keel is straightened and leveled, the sound-absorbing ceiling board can be placed in the frame composed of the main and secondary keels, and the board can be placed on the elbow of the keel. When installing, pay attention to the installation from the middle of the room to both sides. After the large area is installed in one piece, install special parts such as walls, lamp holes, and manholes.
When choosing and purchasing sound-absorbing ceiling materials, be sure to choose a regular manufacturer and not be greedy for cheap. In the process of ceiling installation, be sure to pay attention to inspection. Once any defects are found, they should be corrected immediately to ensure that the installed sound-absorbing panels are firm and reliable. The mineral wool ceiling produced by Jishang is easy to construct, easy to cut, and can also be customized, which is your ideal choice for sound-absorbing ceilings. These are the installation methods of the sound-absorbing panel ceiling that we share for you, I hope it will help you.
